![]() |
Oppo 3001 Exit fastboot mode |
Here we will be sharing step by step guide to fix Oppo Mirror 3 R3001 stuck on fastboot mode after flash.
This guide is very helpful for those users who have a hard bricked Oppo Mirror 3 R3001 after flashing a rom / firmware. Phone condition is only vibrate when it powered on, and detected as fastboot devices on device manager.
Prerequisite :
- UFI Box / UFI Dongle
- Download " exit fastboot mode Oppo R3001 " file ( download link at the end of the post )
- Qualcomm driver installed
- Disable driver signature for 64 bit PC
Guide :
- Open UFI Android Tool Box software
- Extract downloaded file and copy to directory UFI/androidtoolbox/Oppo/3001/
- Click FLASH tab
- Select Oppo on brand menu
- Select Qualcom on platform menu
- Select Oppo F1f on model menu and click rawprogram2
- Switch phone into Qualcomm 9008 mode ( powered off phone, press & hold Volume Up + Volume Down button and then connect usb cable )
- Make sure Qualcomm 9008 is detected on device manager
- Click FLASH button
- If there's is no problem with eMMC, now phone must be powered on properly.
![]() |
Fix Oppo Mirror 3 R3001 stuck on fastboot mode using UFI Box / UFI Dongle |
password : www.samsdroid.com
0 comments:
Post a Comment