Coolpad Fancy E561 EDL Flashing / Unbricking

Coolpad Fancy E561 EDL Flashing

EDL is Emergency Download mode on Qualcomm processor chipset devices. This mode will be needed when your device get hard bricked and unable to unbricked using YGDP Tool.

Here below is the simple guide to flashing / unbricking Coolpad Fancy E561 using EDL / 9008 mode

Prerequisite :

-  Collpad Fancy E561 EDL / 9008 firmware ( download link at the end of article )
-  QPST / QFIL software, UFI Android ToolBox
-  Make sure the phone have at least 50% of battery percentage
-  Qualcomm Driver, disable driver signature first for Win 64 bit user
-  Put the phone into EDL / 9008 mode, need short test point below :

Coolpad Fancy E561 Force EDL / 9008 mode testpoint

Guide :

* Using QFIL
- Install QPST software
- Open QFIL software
- Click Flat build
- Browse on select programer, go to firmware folder and select prog_emmc_firehose_8916.mbn
- Click on Load XML, go to firmware folder and then select rawprogram0.xml & patch0.xml
- Put the phone into EDL / 9008 mode
- Makesure device is detected on device manager as Qualcomm 9008 devices
- Click Download
- Wait until process done

Coolpad Fancy E561 EDL flashing with QFIL

* Using UFI Android ToolBox
- Open UFI Android ToolBox software
- Click Flash tab
- Click Qualcomm
- Select prog_emmc_firehose_8916.mbn as qualcomm SOC
- Drag & drop rawprogram0.xml and patch0.xml from firmware
- Put the phone into EDL / 9008 mode
- Makesure device is detected on device manager as Qualcomm 9008 devices
- Clcik Flash
- Wait until process done

Coolpad Fancy E561 EDL flashing with UFI Android ToolBox

Download Password : tamanpokland

Posted in: Coolpad E561, Tutorial